Servo Injection Molding Robot - Large Servo Traverse Type Robot is extensively applied to plastic injection molding machine 1800T ~ 3500T.
Servo Injection Molding Robot - Large Servo Traverse Type Robot can rapid take out the injection runners, sprues and finished products from the mold of plastic injection molding machine.
Servo Injection Molding Robot - Large Servo Traverse Type Robot can achieve requirement of Plastic Injection Molding Factory Automation (FA).
Advanced Control Functions! Extremely Flexible Program Editing!
320×240 colorful screen for easy reading.
High speed, highly efficient 16Bit CPU Working frequency is 133MHz.
Servo board and CPU board are single board design for independent change.
Includes USB interface for changing programs
Hand Wheel Encoder can be micrometrical adjusted.
External waiting、Rear pick function and Fast setting function for in-mold pick.
Suitable for irregular take-out motions for special products, such as hooked products.
Allows for products stacking up to 99×99×99 points. Once stacking quantity has been reached , an out signal is transferred to conveyor belt. When preforming the first time stacking ,any foreign product existing on the production line will be detected. If the foreign product is not removed during stacking ,stacking motion will stop.
Provides insert in-mold function, and picks product at a setting position. Once mold opens, the robot picks product and inserts it into a specified position.
Allows for simultaneous editing of 3 axes positions.
Module functions provides 16384 commands for program editing and memory function.
Speed increasing and reducing function. A hand wheel is provided for convenient program editing and simulation.
In manual mode, operator may use a hand wheel for micrometric position adjustment. This avoids operational error and provides protection for the mold.
Advanced injection confirmation signal eliminates the problem of robot bumping and clamping against the mold.
The robot arm can perform inside insert and take-out function at any position inside or outside of mold.
Remote controller with the LCD display for easy reading. The screen capacity is 260 Chinese or 520 English characters.
Choice of English/Chinese displays on screen. The control panel is a separated design, allowing for operation control at any position. Machine interlock, safety door control, product counting and cycle time.
The control system fully meet CE,SPI and EUROMAP international standards, and is compatible with that of any injection molding machine in the world.
Features Of Structure
Driven by Japanese MITSUBISHI Server Motor combined with rigid rack for stable and vibration-free movement.
Arms are manufactured from Aluminium alloy, featuring less weight,high durability, and wear-resistance. High stability in fast operation cycles.
The second step of vertical stroke is transmitted by steel reinforced belt.Simultaneous motions for the first and second strike give fast stroke speed.
Double linear motion guides that increase loading capacity of arm and service life.
A large , durable , flexible strip is provided to prevent the electrical wires and air circuit pipes from being damaged .
All components on this robot are made by modular manufacturing for superior interchangeability.
Model
TEL-2000SNC3P
TEL-2500SNC3P
TEL-3000SNC3P
TEL-3500SNC3P
TEL-4000SNC3P
Suited For Injection Molding Machine
1,600 - 1,800 Tons
2,000 - 2,500 Tons
3,000 - 3,500 Tons
3500 Tons as above
3500 Tons as above
Power Source
3∮220V±10%,50/60Hz
Max. Electric Consumption
25A
Air Pressure
6kg/cm²
Drive System
Servo Motor
Take-out stroke(z)
2000
2500
3000
3500
4000
Longitudinal stroke (Y)
1160
1460
1820
2100
2500
Traverse stroke (X)
3120
3600
3600
4000
4300
Posture (A)
90º
Max. Grip Weight (Jip Weight Included)
35 kg
70 kg
Air Consumption
(NL/cycle)(preasure 5kg/cm²)
100 L/Min
Related Products
Servo Injection Molding Robot - Small Servo Traverse Type Robot Arm (TES-SNC3 / DNC3 Series)
Servo Injection Molding Robot - Small Servo Traverse Type Robot Arm (TEH-SNC3P/DNC5P Series)
Servo Injection Molding Robot - Middle Servo Traverse Type Robot Arm (TEM-SNC3P/DNC5P Series)
